The Black Stripping Pad is constructed of polyester fibers in an open texture nonwoven fabrication. Abrasive particles are distributed throughout the pad and adhered to the nonwoven construction with a sturdy adhesive.
Use :
Use with water based floor stripping solution to remove worn and soiled floor finishes or sealers. May also used to clean heavily soiled hard surface floors, such as concrete, when used with proper cleaning solutions. For use on standard electric floor machines or automatic scrubbers. Ideal for use on machines speeds up to 350 rpm.
Directions for Use :
Dust mop or sweep floors prior to stripping. Use pad until soil and finish are removed from floor. Pick up stripping or cleaning solution with a mop, wet vacuum or automatic scrubber. Rinse floor and let dry prior to recoating or opening to traffic.
Construction:
The Black Stripping Pad is constructed of polyester fibers along with synthetic adhesives that will not be notably affected by water or cleaners used in standard floor maintenance. The abrasives used in this product are synthetic. This pad has been designed for use on both sides.
Environmental Initiatives :
a. Polyester fiber used in our pads come from 100% post consumer and industrial recycled waste product.
b. Full Cycle® , formulated to biodegrade* in a fraction of the time that it takes conventional floor pads once discarded into an active landfill.
c. Water Based Latex Resins are used in the manufacturing process. No phenolformaldehyde resins are used in our binding process.
d. Shipping cartons contain at least 45% recycled material.
e. Plant is operating under EPA approved Clean Air Permit.
Product Care :
To prolong the life of this product it may be washed using a hose with a pressure spray nozzle to remove soil. To dissolve heavy soil or finish this pad may be soaked in detergent or diluted stripping solution prior to washing.
Sizes :
Disc Size (Diameter) Center Hole
17 inch……………………………….. 3.25 inch
Reviews
There are no reviews yet.